NSN 5306-01-465-7073
Coaxial Connector
Per mil-h-6875, heat treat 160-180 ksi ftu; 95 ksi minimum ultimate shear.
Manufacturer part number NAS6603H15 for national stock number 5306014657073.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-465-7073.
-
MPN or Model
NAS6603H15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.268 inches and 1.298 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.046 inches and 0.056 inches -
Grip Diameter
Between 0.184 inches and 0.185 inches -
End Application
F16 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6603 professional/industrial association standard
More from these suppliers
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-038-8994 MPN NAS1352-4-14PSocket Head Cap Screw
- 5305-00-052-7469 MPN MS35198-100Machine Screw
- 5305-00-052-8905 MPN MS24630-59Tapping Screw
- 5305-00-057-7479 MPN MS35203-58Machine Screw
- 5305-00-060-7858 MPN NAS1081-08A3Setscrew
- 5305-00-104-7608 MPN NAS1352C3LN40Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-465-7073 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6603H15 | National Aerospace Standards |