NSN 5306-01-466-1124
Close Tolerance Hex Head Bolt
Between 1.408 inches and 1.470 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number PBF1479-4-17A for national stock number 5306014661124.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-466-1124.
-
MPN or Model
PBF1479-4-17A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.377 inches -
Fastener Length
Between 1.408 inches and 1.470 inches -
Head Style
Double hexagon -
Head Height
Between 0.154 inches and 0.174 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-2005 MPN ST3M652C3-7AClose Tolerance Screw
- 5305-01-435-9139 MPN BACB30LH3-12Close Tolerance Screw
- 5305-01-462-2848 MPN 3M1169V3-3AClose Tolerance Screw
- 5306-00-900-5282 MPN VFK100G-05066Shear Bolt
- 5306-01-044-0740 MPN VAL22034-8G90Shear Bolt
- 5306-01-054-8390 MPN C7521L6-16Shear Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-466-1124 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1479-4-17A | Sps Technologies, Llc |
GB511GG4-17A | Northrop Grumman Systems Corporation |
VCD0020-4-17A | Valley-todeco, Inc. |
92147-17A | Sps Technologies, Llc |