NSN 5306-01-466-7069
Coaxial Connector
125 ksi min fsu, 900 degrees fahrenheit, external wrenching spline drive.
Manufacturer part number 20-089-8D31 for national stock number 5306014667069.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-466-7069.
-
MPN or Model
20-089-8D31
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
2.503 inches -
Head Style
Spline drive shear head -
Head Height
0.050 inches -
Grip Diameter
Between 0.498 inches and 0.499 inches -
Head Minor Diameter
0.772 inches -
End Application
Emergency nsn - isol -
Thread Diameter
0.500 inches -
Grip Length
1.937 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
30900 pounds per square inch -
Criticality Code Justification
Agav -
Part Name Assigned By Controlling Agency
Inavy) bolt, shear -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-121-6712 MPN 204-031-236-9Lower Skin Stiffener
- 1680-00-148-9116 MPN 204-075-589-001Control Panel Assy
- 1560-00-179-0813 MPN 205-031-202-002External Fitting Assembly
- 1560-00-236-3483 MPN 209-062-901-166Plenu Firewall Assy
- 1680-00-237-9013 MPN 212-001-119-5Pilot Stick Support
- 1560-00-239-0338 MPN 209-062-910-17Retainer Assembly
- 1560-00-408-3743 MPN 212-061-627-001Fuel P Bracket Assy
- 1560-00-422-2424 MPN 209-031-185-2Bulkhead Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-466-7069 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-089-8D31 | Bell Helicopter Textron Inc. |