NSN 5306-01-466-9183
Coaxial Connector
0.250 inches fastener length, hexagon head style, between 0.562 inches and 0.577 inches head height, width between flats: between 1.614 inches and 1.627 inches .
Manufacturer part number NAS6218-32 for national stock number 5306014669183.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-466-9183.
-
MPN or Model
NAS6218-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.250 inches -
Fastener Length
0.250 inches -
Head Style
Hexagon -
Head Height
Between 0.562 inches and 0.577 inches -
Width Between Flats
Between 1.614 inches and 1.627 inches -
Grip Diameter
Between 1.247 inches and 1.249 inches -
Thread Diameter
1.125 inches -
Grip Length
Between 2.974 inches and 3.004 inches -
Thready Qty Per Inch (tpi)
12 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-1699 MPN NAS1360C2C33FMateri Aircraft Pin
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-050-4271 MPN MS24667-2Socket Head Cap Screw
- 5305-00-054-9229 MPN MS24694C117Machine Screw
- 5305-00-058-4020 MPN MS24694S122Machine Screw
- 5305-00-067-9826 MPN MS35307-530Hexagon Head Cap Screw
- 5305-00-071-6614 MPN NAS1191E4P7LSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-466-9183 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6218-32 | National Aerospace Standards |