NSN 5306-01-466-9190
Coaxial Connector
0.437 inches fastener length, hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6707-51 for national stock number 5306014669190.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-466-9190.
-
MPN or Model
NAS6707-51
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.437 inches -
Fastener Length
0.437 inches -
Head Style
Hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.431 inches -
Grip Length
Between 3.299 inches and 3.329 inches -
Thready Qty Per Inch (tpi)
20 -
Material
Stainless steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-554-6465 MPN C905NWA12H0Aircraft Amber Lamp
- 5940-01-625-6038 MPN NAS1063F-1-2Terminal Board Marker Strip
- 5305-00-008-5853 MPN NAS1630E18PMachine Screw
- 5305-00-044-5889 MPN NAS1351C06H10Socket Head Cap Screw
- 5305-00-052-5923 MPN MS35198-69Machine Screw
- 5305-00-068-5414 MPN MS16995-11Socket Head Cap Screw
- 5305-00-115-3032 MPN MS21090-0411Socket Head Cap Screw
- 5305-00-143-3201 MPN MS21093-343Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-466-9190 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6707-51 | National Aerospace Standards |