NSN 5306-01-466-9972
Coaxial Connector
Between 2.786 inches and 2.816 inches fastener length, dished hexagon head style, between 0.562 inches and 0.577 inches head height, width between flats: between 1.614 inches and 1.627 inches .
Manufacturer part number NAS6218-29 for national stock number 5306014669972.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-466-9972.
-
MPN or Model
NAS6218-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.989 inches -
Fastener Length
Between 2.786 inches and 2.816 inches -
Head Style
Dished hexagon -
Head Height
Between 0.562 inches and 0.577 inches -
Width Between Flats
Between 1.614 inches and 1.627 inches -
End Application
1730-01-215-5763, e2 acft -
Thread Diameter
1.125 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
12 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-611-3884 MPN 63-1997-2Aircraft Structural Component Support
- 5305-00-008-9113 MPN NAS1190C02T4LSocket Head Cap Screw
- 5305-00-052-7000 MPN NAS1096-2-5Machine Screw
- 5305-00-052-8902 MPN MS24630-56Tapping Screw
- 5305-00-058-9378 MPN MS51977-50Setscrew
- 5305-00-068-9174 MPN MS90725-25Hexagon Head Cap Screw
- 5305-00-150-0810 MPN NAS1100E08-46PMachine Screw
- 5305-00-177-5500 MPN NAS1081-06B3Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-466-9972 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6218-29 | National Aerospace Standards |