NSN 5306-01-466-9996
Coaxial Connector
Between 2.568 inches and 2.598 inches fastener length, dished hexagon head style, between 0.500 inches and 0.515 inches head height, width between flats: between 1.427 inches and 1.440 inches .
Manufacturer part number NAS6216-27 for national stock number 5306014669996.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-466-9996.
-
MPN or Model
NAS6216-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.895 inches -
Fastener Length
Between 2.568 inches and 2.598 inches -
Head Style
Dished hexagon -
Head Height
Between 0.500 inches and 0.515 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
End Application
1730-01-215-5763, e2 acft -
Thread Diameter
1.000 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
12 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-040-9354 MPN NAS514P428-18PMachine Screw
- 5305-00-059-2487 MPN MS51976-38Setscrew
- 5305-00-115-9358 MPN NAS514P440-9PMachine Screw
- 5305-00-206-3700 MPN NAS517-3-8Machine Screw
- 5305-00-207-8740 MPN NAS333FA5Close Tolerance Screw
- 5305-00-240-9441 MPN NAS1635-04-3PMachine Screw
- 5305-00-269-2802 MPN MS90726-59Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-466-9996 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6216-27 | National Aerospace Standards |