NSN 5306-01-467-0621
Coaxial Connector
Between 2.513 inches and 2.543 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number NAS6307U32 for national stock number 5306014670621.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-467-0621.
-
MPN or Model
NAS6307U32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.503 inches and 0.553 inches -
Fastener Length
Between 2.513 inches and 2.543 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.4365 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6307 professional/industrial association standard
More from these suppliers
- 5940-00-110-2994 MPN NAS1745-10Conductor Splice
- 1560-01-623-0443 MPN 520-14944-2Aircraft Stringer
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-007-1559 MPN NAS1100E04-16PMachine Screw
- 5305-00-007-6253 MPN NAS1189-02P4LSocket Head Cap Screw
- 5305-00-058-4072 MPN NAS1133E2Close Tolerance Screw
- 5305-00-066-8190 MPN MS35308-511Hexagon Head Cap Screw
- 5305-00-150-9268 MPN MILS7839Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-467-0621 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6307U32 | National Aerospace Standards |