NSN 5306-01-467-3018
Close Tolerance Hex Head Bolt
Between 1.472 inches and 1.502 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: 0.480 inches .
Manufacturer part number NAS6704CD17 for national stock number 5306014673018.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-467-3018.
-
MPN or Model
NAS6704CD17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.472 inches and 1.502 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
0.480 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.294 inches first hole and 1.324 inches first hole -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-c-320 class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6704 professional/industrial association standard
More from these suppliers
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-008-5888 MPN NAS1102C06-12PMachine Screw
- 5305-00-052-4046 MPN NAS1081-6D12Setscrew
- 5305-00-053-8078 MPN MS24677-105Socket Head Cap Screw
- 5305-00-058-9392 MPN MS51977-77Setscrew
- 5305-00-059-4556 MPN NAS600-18PMachine Screw
- 5305-00-124-3778 MPN NAS1191-6P20Socket Head Cap Screw
- 5305-00-144-9080 MPN NAS1603T19Shoulder Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-467-3018 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6704CD17 | National Aerospace Standards |
NAS6704CD17 | National Aerospace Standards |
NAS6704CD17 | National Aerospace Standards |