NSN 5306-01-468-0072
Coaxial Connector
Between 1.579 inches and 1.609 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6705HU18 for national stock number 5306014680072.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-468-0072.
-
MPN or Model
NAS6705HU18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.579 inches and 1.609 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Material Specification
Ms 5737 assn standard single material response or ams 5732 assn standard single material response or ams 5853 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3010 MPN NAS1063B249-258Terminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-003-9327 MPN NAS6003U18Machine Screw
- 5305-00-008-3700 MPN NAS1191C04P6LSocket Head Cap Screw
- 5305-00-063-3507 MPN MS24693-S274Machine Screw
- 5305-00-064-3626 MPN NAS560XK2-10Machine Screw
- 5305-00-115-9441 MPN NAS1352-02LL6PSocket Head Cap Screw
- 5305-00-143-3307 MPN NAS1623-10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-468-0072 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
NAS6705HU18 | National Aerospace Standards |
Stock Check
- NE: 1634
- NS: 37