NSN 5306-01-468-2075
Coaxial Connector
Shank is cadmium plated per qq-p-416, type ii, class 2.
Manufacturer part number NAS464P4A10 for national stock number 5306014682075.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-468-2075.
-
MPN or Model
NAS464P4A10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.953 inches and 1.000 inches -
Fastener Length
Between 1.062 inches and 1.141 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
0.250 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.609 inches and 0.641 inches -
Material
Steel -
Material Specification
Nas498 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas464 professional/industrial association standard
More from these suppliers
- 5935-01-447-1147 MPN 2805821P01Electrical Receptacle Connector
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-051-2330 MPN MS51958-99Machine Screw
- 5305-00-052-5950 MPN MS35198-9Machine Screw
- 5305-00-058-9371 MPN MS51977-33Setscrew
- 5305-00-060-4353 MPN NAS1100-08-22Machine Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-468-2075 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P4A10 | National Aerospace Standards |