NSN 5306-01-469-0926
Coaxial Connector
5.166 inches fastener length, hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number NAS1312-66 for national stock number 5306014690926.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-469-0926.
-
MPN or Model
NAS1312-66
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.8 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
5.166 inches -
Head Style
Hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
0.7490 inches -
Thread Diameter
0.7500 inches -
Grip Length
5.166 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Thread Pitch In Millimeters
13.3 -
External Thread Tolerance Class
3a -
Material
Steel -
Material Specification
Mil-b-7868 military specification 1st material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Bqq-p-416, typeii, class2 military specification 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-058-2067 MPN NAS1352-06H6PSocket Head Cap Screw
- 5305-00-151-6146 MPN NAS1352-04-36PSocket Head Cap Screw
- 5305-00-167-3631 MPN NASM7839Machine Screw
- 5305-00-180-0003 MPN AN525-8R11Machine Screw
- 5305-00-182-9294 MPN NAS387-1032-6PMachine Screw
- 5305-00-225-3840 MPN MS90725-7Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-469-0926 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1312-66 | National Aerospace Standards |
Stock Check
- NE: 951
- NS: 1