NSN 5306-01-469-8494
Coaxial Connector
Heat treatment is 180 ksi min. Ult. Tensile; 108 ksi min. Ult. Shear at room temperature.
Manufacturer part number NAS1954C6 for national stock number 5306014698494.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-469-8494.
-
MPN or Model
NAS1954C6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.800 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
0.510 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
End Application
1520-01-355-8250 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
32.0 microinches sides of head -
Material
Stainless steel -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1954 professional/industrial association standard
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-059-8682 MPN MS35218-39Machine Screw
- 5305-00-068-0538 MPN MS24677-21Socket Head Cap Screw
- 5305-00-102-4557 MPN NAS1352-7LE40PSocket Head Cap Screw
- 5305-00-104-5082 MPN NAS1352-7LE52PSocket Head Cap Screw
- 5305-00-155-4769 MPN MS35190-336Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-469-8494 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1954C6 | National Aerospace Standards |
Stock Check
- NS: 182
- NE: 1800