NSN 5306-01-470-1920
Coaxial Connector
Between 3.896 inches and 3.926 inches fastener length, spline extended washer head style, between 0.790 inches and 0.810 inches head height, extended washer diameter: between 1.846 inches and 1.856 inches .
Manufacturer part number MS21134-16040 for national stock number 5306014701920.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-470-1920.
-
MPN or Model
MS21134-16040
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.396 inches -
Fastener Length
Between 3.896 inches and 3.926 inches -
Head Style
Spline extended washer -
Head Height
Between 0.790 inches and 0.810 inches -
Extended Washer Diameter
Between 1.846 inches and 1.856 inches -
Extended Washer Thickness
Between 0.134 inches and 0.154 inches -
Grip Diameter
1.000 inches -
Head Minor Diameter
Between 1.047 inches and 1.062 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
126000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-604-8346 MPN NAS26-3Tank Strap Trunnion
- 5905-01-067-0847 MPN M8340102M4701GBFilm Fixed Resistor Network
- 5940-01-382-0217 MPN NAS1063B216-225Terminal Board Marker Strip
- 1560-01-520-7463 MPN NAS3727-15Cord Assembly
- 5940-01-625-6053 MPN NAS1063C6-2Terminal Board Marker Strip
- 5305-00-007-0279 MPN NAS1100E06-14PMachine Screw
- 5305-00-043-0613 MPN NAS1189-3T7Socket Head Cap Screw
- 5305-00-051-4133 MPN MS24694C93Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-470-1920 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-16040 | National Aerospace Standards |
MS21134 | National Aerospace Standards |