NSN 5306-01-470-4500
Coaxial Connector
Between 2.463 inches and 2.493 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: 0.439 inches .
Manufacturer part number RA22018-6H20 for national stock number 5306014704500.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-470-4500.
-
MPN or Model
RA22018-6H20
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.614 inches -
Fastener Length
Between 2.463 inches and 2.493 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
Between 0.081 inches and 0.101 inches -
Hole Diameter
0.055 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 newtons per square millimeter -
Material
Steel comp xm-13 -
Material Specification
Ph13-8mo mfr ref single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-369-1700 MPN 3M123-4D15PClose Tolerance Screw
- 5305-00-427-6529 MPN HT4024L5-7-1Close Tolerance Screw
- 5305-00-465-5483 MPN NAS1189E4P12NSocket Head Cap Screw
- 5305-00-492-8744 MPN NAS1101-06-7BMachine Screw
- 5305-00-501-9998 MPN LS15237-4-35DClose Tolerance Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-025-4364 MPN E125-311Machine Screw
- 5305-01-030-7636 MPN HT4049-4D10Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-470-4500 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RA22018-6H20 | Huck International, Inc. |
RA22018-6H20 | Huck Intl Inc |