NSN 5306-01-470-4987
Coaxial Connector
4.181 inches fastener length, hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.678 inches and 0.690 inches .
Manufacturer part number NAS6307-50 for national stock number 5306014704987.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-470-4987.
-
MPN or Model
NAS6307-50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
4.181 inches -
Head Style
Hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.678 inches and 0.690 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 3.638 inches and 3.668 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard 1st material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-460-1733 MPN NAS0745/14Conductor Splice
- 5940-00-833-5836 MPN NAS1063A2-708Terminal Board Marker Strip
- 5940-01-372-2939 MPN NAS1063D1-10Terminal Board Marker Strip
- 5940-01-425-6036 MPN NAS1063A5-431Terminal Board Marker Strip
- 5305-00-008-2105 MPN NAS1100C04-8PMachine Screw
- 5305-00-008-5888 MPN NAS1102C06-12PMachine Screw
- 5305-00-053-0614 MPN NAS1100C04-22Machine Screw
- 5305-00-070-1895 MPN NAS1202-15Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-470-4987 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6307-50 | National Aerospace Standards |