NSN 5306-01-470-4992
Coaxial Connector
Between 2.213 inches and 2.243 inches fastener length, double hexagon w/hole head style, between 0.378 inches and 0.398 inches head height, width between flats: 0.491 inches .
Manufacturer part number RA22018-6H16 for national stock number 5306014704992.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-470-4992.
-
MPN or Model
RA22018-6H16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.614 inches -
Fastener Length
Between 2.213 inches and 2.243 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.378 inches and 0.398 inches -
Width Between Flats
0.491 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.091 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.599 inches and 1.629 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
22000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ph 13-8mo federal standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-079-1751 MPN NAS1101C3-26Machine Screw
- 5305-00-808-3282 MPN NAS1102-04-5Machine Screw
- 5305-01-041-9629 MPN BACB30LH3-7Close Tolerance Screw
- 5305-01-132-4366 MPN HT4025L4-6Close Tolerance Screw
- 5305-01-132-8528 MPN BM19045-614AClose Tolerance Screw
- 5305-01-141-7913 MPN HT4008-5-20Shoulder Screw
- 5305-01-158-5367 MPN 3M893-5-8Machine Screw
- 5305-01-217-5993 MPN DPY7900P-10-C-3 5Panel Screw Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-470-4992 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RA22018-6H16 | Huck International, Inc. |
RA22018-6H16 | Huck Intl Inc |