NSN 5306-01-471-4379
Coaxial Connector
Between 22.7 millimeters and 23.3 millimeters fastener length, hexagon head style, between 2.7 millimeters and 3.0 millimeters head height, width between flats: between 7.85 millimeters and 8.00 millimeters .
Manufacturer part number NA0045-050014 for national stock number 5306014714379.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-471-4379.
-
MPN or Model
NA0045-050014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
9.0 millimeters -
Fastener Length
Between 22.7 millimeters and 23.3 millimeters -
Head Style
Hexagon -
Head Height
Between 2.7 millimeters and 3.0 millimeters -
Width Between Flats
Between 7.85 millimeters and 8.00 millimeters -
Grip Diameter
Between 4.965 millimeters and 4.990 millimeters -
End Application
1427-01-439-8639 -
Thread Diameter
5.0 millimeters -
Grip Length
Between 12.8 millimeters and 14.2 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Thread Pitch In Millimeters
0.8 -
External Thread Tolerance Class
4h6h -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5940-00-892-2911 MPN NAS1388-3Conductor Splice
- 5935-01-581-2487 MPN MS27488-20-2Electrical Connector End Seal Plug
- 5935-01-669-1857 MPN 31Electrical Plug Connector
- 5305-00-008-5905 MPN NAS1189E02T5LSocket Head Cap Screw
- 5305-00-021-3616 MPN MS35307-305Hexagon Head Cap Screw
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-151-6173 MPN NAS1635-01-4Machine Screw
- 5305-00-206-4843 MPN AN565A10-4Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-471-4379 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0045-050014 | National Aerospace Standards |