NSN 5306-01-471-6973
Coaxial Connector
Temp. To 450 degf.
Manufacturer part number MS21134-05036 for national stock number 5306014716973.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-471-6973.
-
MPN or Model
MS21134-05036
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.541 inches -
Fastener Length
Between 2.791 inches and 2.821 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.302 inches and 0.322 inches -
Width Between Flats
Between 0.575 inches and 0.585 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 4.615 inches and 4.635 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
11100 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas-21134 professional/industrial association standard
More from these suppliers
- 5940-01-548-8992 MPN NAS24-3KLug Terminal
- 5940-01-451-4891 MPN NAS1063A10-105BWTerminal Board Marker Strip
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 1680-01-662-0933 MPN MS24665-358Cotter Pin A469 Nrp
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5305-00-007-0208 MPN NAS1100E00-5Machine Screw
- 5305-00-007-0279 MPN NAS1100C06-14PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-471-6973 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21134-05036 | National Aerospace Standards |
MS21134-05036 | Military Standards |