NSN 5306-01-472-8579
Coaxial Connector
Bolt is 160 ksi ftu.
Manufacturer part number NAS6308-26 for national stock number 5306014728579.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-472-8579.
-
MPN or Model
NAS6308-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
Between 2.138 inches and 2.168 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
End Application
1520-01-088-3669 -
Thread Diameter
0.5000 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches grip -
Material
Stainless steel -
Material Specification
Qq-p-416, type ii, class 2 federal specification single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6308 professional/industrial association standard
More from these suppliers
- 4920-00-922-5842 MPN 114GS198-1Oil Fi Test Fixture
- 1560-01-029-5359 MPN A15P7517-1Engine Mount Segment Assembly
- 4820-01-039-0896 MPN A15PS427-1Vent Valve
- 5905-01-133-3159 MPN 145E2102-8Composition Fixed Resistor
- 5985-01-134-2270 MPN 114E3082-6Sense Antenna
- 1560-01-164-9448 MPN 145S2907-1Forwar Fairing Assy
- 1560-01-349-9025 MPN 414E4051-6Aircraft Structural Plate
- 1560-01-374-9454 MPN 114S1612-7Aircraft Structural Component Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-472-8579 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308-26 | National Aerospace Standards |
NAS6308-26 | The Boeing Company |
Stock Check
- NE: 528