NSN 5306-01-474-0957
Coaxial Connector
Between 1.794 inches and 1.824 inches fastener length, spline extended washer head style, between 0.327 inches and 0.347 inches head height, extended washer diameter: between 0.691 inches and 0.701 inches .
Manufacturer part number 20-106-06018L for national stock number 5306014740957.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-474-0957.
-
MPN or Model
20-106-06018L
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.659 inches -
Fastener Length
Between 1.794 inches and 1.824 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
End Application
F/a-18e aircraft -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Criticality Code Justification
Agav -
Surface Finish
32.0 microinches bearing surface of head -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response or ams 5663 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-137-0932 MPN NAS1666-18Electrical Connector Cable Clamp
- 5940-00-725-9498 MPN NAS707C2Stud Terminal
- 5940-01-470-3346 MPN NAS1063A2-107BATerminal Board Marker Strip
- 5305-00-005-8210 MPN NAS1351C03-4Socket Head Cap Screw
- 5305-00-059-7411 MPN MS35202-28Machine Screw
- 5305-00-080-9238 MPN NAS584-11Machine Screw
- 5305-00-225-4597 MPN MS24694A59Machine Screw
- 5305-00-269-4209 MPN 207-19Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-474-0957 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
20-106-06018L | Bell Helicopter Textron Inc. |
MS14181-06018L | National Aerospace Standards |
MS14181-06018L | Military Standards |
Stock Check
- NE: 1014
- NS: 4