NSN 5306-01-475-5200
Coaxial Connector
0.516 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6206-1H for national stock number 5306014755200.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-475-5200.
-
MPN or Model
NAS6206-1H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
0.516 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.3695 inches and 0.3700 inches -
End Application
Fixed wing aircraft, c130j hercules, lockheed martin corp -
Thread Diameter
0.375 inches -
Grip Length
0.062 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-502-4359 MPN NAS1666-12AElectrical Connector Cable Clamp
- 5935-01-080-8127 MPN NAS1652R16B26PNElectrical Receptacle Connector
- 5940-01-511-8758 MPN NAS1063A10-10ADTerminal Board Marker Strip
- 5935-01-355-3702 MPN AS34061Electrical Plug Connector
- 5305-00-008-5889 MPN NAS1102C08-9Machine Screw
- 5305-00-052-7482 MPN MS35198-84Machine Screw
- 5305-00-067-9914 MPN MS24674-7Socket Head Cap Screw
- 5305-00-082-1656 MPN NAS1081C06A3Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-475-5200 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6206-1H | National Aerospace Standards |