NSN 5306-01-477-4747
Coaxial Connector
Between 4.232 inches and 4.252 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: 0.3125 inches .
Manufacturer part number NASM8831 for national stock number 5306014774747.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-477-4747.
-
MPN or Model
NASM8831
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
8 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.492 inches -
Fastener Length
Between 4.232 inches and 4.252 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
0.3125 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Hole Diameter
Between 0.032 inches and 0.042 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 3.740 inches and 3.760 inches -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qqq-p-416 ty2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-226-0555 MPN NAS303-25-5133Arrestin Cable Assy
- 4920-01-532-5091 MPN NAS77A12-94Airc Sleeve Bushing
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-007-1556 MPN NAS1100E02-3PMachine Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-016-8175 MPN MS27039-5-27Machine Screw
- 5305-00-054-2266 MPN MS24678-60Socket Head Cap Screw
- 5305-00-074-1995 MPN NAS1081C04A10NSetscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-477-4747 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASM8831 | National Aerospace Standards |
MS21250H04060 | National Aerospace Standards |
MS21250H04060 | Military Standards |