NSN 5306-01-477-7216
Coaxial Connector
1.000 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS655V10D for national stock number 5306014777216.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-477-7216.
-
MPN or Model
NAS655V10D
-
Schedule B
8108.90.8000 (Other wrought titanium, nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
0.311 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.882 inches first hole -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-5052 MPN NAS1063A20TB42BTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-009-7703 MPN NAS1218-06E1Machine Screw
- 5305-00-052-6910 MPN MS24629-14Tapping Screw
- 5305-00-052-7425 MPN NASM35198-92Machine Screw
- 5305-00-066-7323 MPN MS24694C63Machine Screw
- 5305-00-070-3116 MPN NAS1102C3-7Machine Screw
- 5305-00-103-2959 MPN NAS1219-5-18PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-477-7216 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS655V10D | National Aerospace Standards |