NSN 5306-01-477-8202
Close Tolerance Hex Head Bolt
Internal drive is a cruciform recess; item is non-locking.
Manufacturer part number NAS7802-4 for national stock number 5306014778202.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-477-8202.
-
MPN or Model
NAS7802-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.558 inches and 0.588 inches -
Head Style
Undercut pan no. 2 -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
Between 0.105 inches and 0.115 inches -
Grip Diameter
Between 0.1630 inches and 0.1635 inches -
Thread Diameter
0.1640 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Stainless steel -
Material Specification
Ams 5731 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-425-6509 MPN NAS1063A5-442Terminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-007-0208 MPN NAS1100E00-5Machine Screw
- 5305-00-007-3019 MPN NAS1102C02-3PMachine Screw
- 5305-00-007-9880 MPN NAS1100E04-5PMachine Screw
- 5305-00-050-9222 MPN MS24667-42Socket Head Cap Screw
- 5305-00-057-0530 MPN NASM51958Machine Screw
- 5305-00-058-2073 MPN NAS1352-02-3Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-477-8202 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7802-4 | National Aerospace Standards |