NSN 5306-01-477-9337
Coaxial Connector
3.391 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6306-47D for national stock number 5306014779337.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-477-9337.
-
MPN or Model
NAS6306-47D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
3.391 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
0.374 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
2.937 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.183 inches first hole -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas4003 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-615-1039 MPN NAS1063C10-210LTerminal Board Marker Strip
- 5940-01-658-0448 MPN NAS1063Terminal Board Marker Strip
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5305-00-007-2962 MPN NAS1743C3T14Socket Head Cap Screw
- 5305-00-008-5813 MPN NAS1742C06R10Socket Head Cap Screw
- 5305-00-008-5896 MPN NAS1102C5-10Machine Screw
- 5305-00-052-5941 MPN MS35198-83Machine Screw
- 5305-00-068-5838 MPN MS24678-36CSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-477-9337 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6306-47D | National Aerospace Standards |