NSN 5306-01-478-1561
Coaxial Connector
Dished hexagon head style, between 0.110 inches and 0.125 inches head height, between 0.367 inches and 0.376 inches width between flats, thread diameter: 0.190 inches.
Manufacturer part number NAS6303-89 for national stock number 5306014781561.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-478-1561.
-
MPN or Model
NAS6303-89
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
End Application
Fighter aircraft-first (f18 e/f) -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Criticality Code Justification
Agav -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-990-1658 MPN NAS705G2Stud Terminal
- 5940-01-447-9983 MPN NAS1063Terminal Board Marker Strip
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-9115 MPN NAS1190E02T7LSocket Head Cap Screw
- 5305-00-022-3124 MPN NAS1221-3-19PMachine Screw
- 5305-00-038-6682 MPN NAS1581A3H4Close Tolerance Screw
- 5305-00-058-9361 MPN MS51977-18Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-478-1561 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303-89 | National Aerospace Standards |