NSN 5306-01-478-7795
Coaxial Connector
Between 4.151 inches and 4.181 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.065 inches .
Manufacturer part number NAS6712P50 for national stock number 5306014787795.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-478-7795.
-
MPN or Model
NAS6712P50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.041 inches -
Fastener Length
Between 4.151 inches and 4.181 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Locking Feature
Patch fastener -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 3.115 inches and 3.135 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Plastic locking feature -
Material Specification
Mil-f-18240 military specification single material response locking feature -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6712 professional/industrial association standard
More from these suppliers
- 5940-00-725-9498 MPN NAS707C2Stud Terminal
- 5940-01-416-6336 MPN NAS1829BT4E14Stud Terminal
- 5305-00-012-8226 MPN MS51851-136Tapping Screw
- 5305-00-058-7611 MPN MS24694S131Machine Screw
- 5305-00-174-1154 MPN NAS223-29Machine Screw
- 5305-00-207-1785 MPN NAS517-4-19Machine Screw
- 5305-00-218-5451 MPN NAS1608-37Shoulder Screw
- 5305-00-225-7765 MPN MS24673-12Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-478-7795 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6712P50 | Zf Industrieantriebe Witten Gmbh |
NAS6712P50 | National Aerospace Standards |
Stock Check
- NE: 3