NSN 5306-01-478-9958
Coaxial Connector
Between 2.568 inches and 2.588 inches fastener length, hexagon head style, between 0.173 inches and 0.203 inches head height, width between flats: between 0.554 inches and 0.564 inches .
Manufacturer part number NAS6706H32 for national stock number 5306014789958.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-478-9958.
-
MPN or Model
NAS6706H32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 2.568 inches and 2.588 inches -
Head Style
Hexagon -
Head Height
Between 0.173 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Hole Diameter
Between 0.060 inches and 0.080 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 1.090 inches and 2.010 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-2574 MPN NAS1063C3-539CTerminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-008-9114 MPN NAS1190E02T6LSocket Head Cap Screw
- 5305-00-057-9972 MPN NAS1351000-6Socket Head Cap Screw
- 5305-00-058-4036 MPN NAS1101-3H7Machine Screw
- 5305-00-059-8682 MPN MS35218-39Machine Screw
- 5305-00-067-3863 MPN NAS1189-3P7NSocket Head Cap Screw
- 5305-00-082-6667 MPN NAS1352C06-12PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-478-9958 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706H32 | National Aerospace Standards |