NSN 5306-01-479-1417
Coaxial Connector
0.495 inches fastener length, dished hexagon head style, 0.249 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6304U2D for national stock number 5306014791417.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-479-1417.
-
MPN or Model
NAS6304U2D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
0.495 inches -
Head Style
Dished hexagon -
Head Height
0.249 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
0.249 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.170 inches first hole -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response -
Surface Treatment
Phosphate -
Surface Treatment Specification
Nas4003 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-007-0278 MPN NAS1100E00-8Machine Screw
- 5305-00-007-2951 MPN NAS1100C01-7Machine Screw
- 5305-00-058-2069 MPN MS24677-11Socket Head Cap Screw
- 5305-00-059-4550 MPN MS35190-235Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-479-1417 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304U2D | National Aerospace Standards |