NSN 5306-01-479-7674
Coaxial Connector
1.653 inches fastener length, spline extended washer head style, between 0.383 inches and 0.403 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number MS21297H07014 for national stock number 5306014797674.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-479-7674.
-
MPN or Model
MS21297H07014
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.778 inches -
Fastener Length
1.653 inches -
Head Style
Spline extended washer -
Head Height
Between 0.383 inches and 0.403 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
Between 0.053 inches and 0.073 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
Head Minor Diameter
Between 0.485 inches and 0.500 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
28300 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams 6587 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8737, ty ii, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-018-0564 MPN MS3116F22-21PXElectrical Plug Connector
- 5935-00-062-1211 MPN MS3103-14S5PElectrical Receptacle Connector
- 5935-00-074-4401 MPN MS3101R28-3SElectrical Plug Connector
- 5935-00-177-2093 MPN MS24266G16T24P6XElectrical Plug Connector
- 5935-00-191-4582 MPN MS3102A22-30PElectrical Receptacle Connector
- 5935-00-198-4041 MPN MS3187A20Electrical Connector End Seal Plug
- 5935-00-222-8120 MPN MS27333-10-1Electrical Connector Potting Mold
- 5935-00-257-2671 MPN MS24265R16B24P6Electrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-479-7674 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H07014 | Military Standards |
VA-97-0503-001 | Leonardo Mw Ltd |