NSN 5306-01-479-9572
Coaxial Connector
Between 4.470 inches and 4.500 inches fastener length, hexagon head style, between 0.250 inches and 0.260 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6708-60 for national stock number 5306014799572.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-479-9572.
-
MPN or Model
NAS6708-60
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 4.470 inches and 4.500 inches -
Head Style
Hexagon -
Head Height
Between 0.250 inches and 0.260 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 3.740 inches and 3.760 inches -
Thready Qty Per Inch (tpi)
20 -
Color
Green threads -
Material
Iron alloy 660 -
Material Specification
Ams5731, ams5732 assn standard 1st material response or ams5853 assn standard 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type2, class2 federal specification 1st treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-83ASNFElectrical Receptacle Connector
- 5940-01-425-7408 MPN NAS1063A11-308Terminal Board Marker Strip
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-007-0279 MPN NAS1100E06-14PMachine Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-052-9971 MPN MS24619-25Tapping Screw
- 5305-00-054-9244 MPN MS24694C105Machine Screw
- 5305-00-068-1263 MPN NASM24667-89Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-479-9572 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6708-60 | National Aerospace Standards |
Stock Check
- NE: 23