NSN 5306-01-480-2607
Coaxial Connector
Between 5.454 inches and 5.484 inches fastener length, between 0.281 inches and 0.296 inches head height, between 0.865 inches and 0.877 inches width between flats, thread diameter: 0.562 inches.
Manufacturer part number NAS6309-78 for national stock number 5306014802607.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-480-2607.
-
MPN or Model
NAS6309-78
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 5.454 inches and 5.484 inches -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 4.665 inches and 4.685 inches -
Thready Qty Per Inch (tpi)
18 -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-243-7679 MPN NAS704S2Stud Terminal
- 5935-00-838-6814 MPN NAS714-19Electrical Receptacle Connector
- 5940-01-425-6522 MPN NAS1063A14-336Terminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5940-01-510-2082 MPN NAS1063A6Terminal Board Marker Strip
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-004-4040 MPN NAS1351-3LE6Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-480-2607 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6309-78 | National Aerospace Standards |