NSN 5306-01-480-7273
Coaxial Connector
Between 2.072 inches and 2.119 inches fastener length, double hexagon head style, 0.194 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number EWSB22-6-27 for national stock number 5306014807273.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-480-7273.
-
MPN or Model
EWSB22-6-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.400 inches -
Fastener Length
Between 2.072 inches and 2.119 inches -
Head Style
Double hexagon -
Head Height
0.194 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
End Application
C141 aircraft -
Thread Diameter
0.375 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-6359 MPN 20097L96C4CSocket Head Cap Screw
- 5305-00-283-7455 MPN 110179-4-8ASClose Tolerance Screw
- 5305-00-460-3031 MPN 64228V5-11Close Tolerance Screw
- 5305-00-486-2320 MPN SFT22-5A6Close Tolerance Screw
- 5305-00-508-2777 MPN LS15267V3-39Machine Screw
- 5305-00-541-9033 MPN LS15234C3-1Close Tolerance Screw
- 5305-00-589-2314 MPN NAS1101-08-12Machine Screw
- 5305-00-880-9828 MPN 406224-3-8Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-480-7273 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-6-27 | Sps Technologies, Llc |
EWSB 22 | Sps Technologies, Llc |