NSN 5306-01-481-6609
Coaxial Connector
Between 3.013 inches and 3.043 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6208-40X for national stock number 5306014816609.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-481-6609.
-
MPN or Model
NAS6208-40X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.503 inches and 0.553 inches -
Fastener Length
Between 3.013 inches and 3.043 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.5141 inches and 0.5151 inches -
End Application
C5 acft -
Thread Diameter
0.500 inches -
Grip Length
Between 2.485 inches and 2.515 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-01-054-0574 MPN NAS1072-3Switch Guard
- 5305-00-007-2943 MPN NAS1100C06-9PMachine Screw
- 5305-00-080-7030 MPN NAS608-5LL16TSocket Head Cap Screw
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
- 5305-00-116-5024 MPN NAS1100C6-16Machine Screw
- 5305-00-145-1032 MPN NAS1152-13Close Tolerance Screw
- 5305-00-182-9339 MPN MS27039DD1-36Machine Screw
- 5305-00-338-2223 MPN NAS1351C08LE6Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-481-6609 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6208-40X | National Aerospace Standards |