NSN 5306-01-481-9365
Close Tolerance Hex Head Bolt
Between 3.285 inches and 3.315 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6703U46 for national stock number 5306014819365.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-481-9365.
-
MPN or Model
NAS6703U46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 3.285 inches and 3.315 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
End Application
F/a-18e -
Thread Diameter
0.250 inches -
Grip Length
Between 3.285 inches and 3.315 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon corners -
Part Name Assigned By Controlling Agency
Bolt, shear, aircraft -
Color
Green threads -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5935-01-597-0336 MPN E0762F17-08LSpec Backshell
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-008-9055 MPN NAS1298-5-18Shoulder Screw
- 5305-00-045-3180 MPN MS24694S101Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-481-9365 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6703U46 | National Aerospace Standards |