NSN 5306-01-482-2243
Coaxial Connector
1.370 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6204-16H for national stock number 5306014822243.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-482-2243.
-
MPN or Model
NAS6204-16H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
1.370 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Hole Diameter
Between 0.048 inches and 0.058 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Thread Diameter
0.250 inches -
Grip Length
1.000 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Ams6415 assn standard 1st material response or ams6322 assn standard 2nd material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-052-5927 MPN MS35198-76Machine Screw
- 5305-00-055-2566 MPN NAS1219-08-7Machine Screw
- 5305-00-057-0479 MPN MS24694C114Machine Screw
- 5305-00-059-3674 MPN MS51958-78Machine Screw
- 5305-00-066-7336 MPN NAS1743C02R10USocket Head Cap Screw
- 5305-00-069-4942 MPN NAS2806-15Close Tolerance Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-482-2243 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-16H | National Aerospace Standards |