NSN 5306-01-482-2245
Coaxial Connector
2.406 inches fastener length, dished hexagon head style, between 0.281 inches and 0.296 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS6209-29D for national stock number 5306014822245.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-482-2245.
-
MPN or Model
NAS6209-29D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
2.406 inches -
Head Style
Dished hexagon -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.560 inches and 0.561 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.174 inches first hole and 2.224 inches first hole -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Ams6415 assn standard 1st material response or ams6322 assn standard 2nd material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, tyii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 5940-01-660-0089 MPN NAS1063A2-536JTerminal Board Marker Strip
- 5305-00-052-5272 MPN MS24693-S286Machine Screw
- 5305-00-054-8291 MPN MS21295-65Socket Head Cap Screw
- 5305-00-058-4072 MPN NAS1133E2Close Tolerance Screw
- 5305-00-071-2502 MPN MS24694A116Machine Screw
- 5305-00-138-9914 MPN NAS662C2R15Machine Screw
- 5305-00-193-5241 MPN NAS1742C02R4USocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-482-2245 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6209-29D | National Aerospace Standards |