NSN 5306-01-482-9496
Coaxial Connector
Between 0.892 inches and 0.922 inches fastener length, hexagon head style, between 0.156 inches and 0.161 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS1305-7HW for national stock number 5306014829496.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-482-9496.
-
MPN or Model
NAS1305-7HW
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 0.892 inches and 0.922 inches -
Head Style
Hexagon -
Head Height
Between 0.156 inches and 0.161 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
Between 0.076 inches and 0.091 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Thread Diameter
0.312 inches -
Grip Length
0.433 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
32.0 microinches bearing surface of head -
Part Name Assigned By Controlling Agency
Bolt, shear, hexagon head -
Material
Steel comp 4140 or steel comp 4340 or steel comp e4340 -
Surface Treatment
Cadmium -
Surface Treatment Specification
11-416 ty1 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1305 professional/industrial association standard
More from these suppliers
- 5940-01-381-7112 MPN NAS1063B236-245Terminal Board Marker Strip
- 5940-01-425-6518 MPN NAS1063A5-450Terminal Board Marker Strip
- 1560-01-611-3884 MPN 63-1997-2Aircraft Structural Component Support
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5305-00-003-9208 MPN NAS1189-6T10LSocket Head Cap Screw
- 5305-00-051-4508 MPN MS51974-27Setscrew
- 5305-00-051-7326 MPN NAS1352-3H10Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-482-9496 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1305-7HW | National Aerospace Standards |