NSN 5306-01-483-2812
Coaxial Connector
Between 0.496 inches and 0.526 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS2813-3 for national stock number 5306014832812.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-483-2812.
-
MPN or Model
NAS2813-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.496 inches and 0.526 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
End Application
C-295 acft -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Hole Quantity
3 -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
3910 pounds per square inch -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-b-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-088-9667 MPN MS24693-C270Machine Screw
- 5305-00-165-7962 MPN NAS1352-04H8Socket Head Cap Screw
- 5305-00-225-7766 MPN MS24673-13Socket Head Cap Screw
- 5305-00-232-9406 MPN NAS514P832-9PMachine Screw
- 5305-00-234-9732 MPN NAS1190E4P8NSocket Head Cap Screw
- 5305-00-235-5808 MPN NAS1100-3-13Machine Screw
- 5305-00-269-4524 MPN MS24694S180Machine Screw
- 5305-00-310-6343 MPN NAS5204U26Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-483-2812 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2813-3 | National Aerospace Standards |
10116297 | Nimikkeistokeskus Ncb Finland |