NSN 5306-01-483-2920
Close Tolerance Hex Head Bolt
Between 1.125 inches and 1.187 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173-11 for national stock number 5306014832920.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-483-2920.
-
MPN or Model
AN173-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 1.125 inches and 1.187 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.734 inches and 0.766 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-189-2970 MPN AN3102A22-22SElectrical Receptacle Connector
- 5935-00-244-9834 MPN AN3100C32-8PElectrical Receptacle Connector
- 5935-00-283-7153 MPN AN3100A18-10SElectrical Receptacle Connector
- 5935-00-435-3965 MPN AN3106E18-11PElectrical Plug Connector
- 5305-00-013-2153 MPN AN501-10-32Machine Screw
- 5305-00-051-4484 MPN AN565B4-3Setscrew
- 5305-00-114-1919 MPN AN115834Machine Screw
- 5305-00-151-2101 MPN AN515-5-10Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-483-2920 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173-11 | Aeronautical Standards Group |