NSN 5306-01-483-2925
Close Tolerance Hex Head Bolt
Undrilled bolt.
Manufacturer part number AN174C5A for national stock number 5306014832925.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-483-2925.
-
MPN or Model
AN174C5A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.468 inches -
Fastener Length
Between 0.640 inches and 0.687 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.172 inches and 0.204 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-636-6093 MPN AN3102E18-8PElectrical Receptacle Connector
- 5930-00-687-1097 MPN AN3022-2Toggle Switch
- 5935-00-222-7829 MPN AN3106A28-12PYElectrical Plug Connector
- 5305-00-151-0540 MPN AN526DD832-7Machine Screw
- 5305-00-151-2523 MPN AN509-10R11Machine Screw
- 5305-00-156-2872 MPN AN505-8R7Machine Screw
- 5305-00-282-3598 MPN AN500C4-4Machine Screw
- 5305-00-282-8514 MPN AN500AD8-22Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-483-2925 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN174C5A | Aeronautical Standards Group |