NSN 5306-01-483-3436
Coaxial Connector
0.885 inches fastener length, dished hexagon head style, 0.189 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6303U9 for national stock number 5306014833436.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-483-3436.
-
MPN or Model
NAS6303U9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.885 inches -
Head Style
Dished hexagon -
Head Height
0.189 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
0.562 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams5731 assn standard 1st material response or ams5732 assn standard 2nd material response or ams5737 assn standard 3rd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Nas4003 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-646-7803 MPN NASM21250-08022Electrical Receptacle Connector
- 5305-00-001-4781 MPN NAS1352-06-8PSocket Head Cap Screw
- 5305-00-004-5179 MPN NAS1100V3-10Machine Screw
- 5305-00-052-6908 MPN MS24629-4Tapping Screw
- 5305-00-057-0498 MPN MS51958-2Machine Screw
- 5305-00-066-7324 MPN MS24694C64Machine Screw
- 5305-00-066-8681 MPN NAS1081C6A16Setscrew
- 5305-00-074-2698 MPN NAS1156-12Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-483-3436 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303U9 | National Aerospace Standards |