NSN 5306-01-483-3855
Coaxial Connector
Between 1.035 inches and 1.065 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30LM4U7 for national stock number 5306014833855.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-483-3855.
-
MPN or Model
BACB30LM4U7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.400 inches and 0.450 inches -
Fastener Length
Between 1.035 inches and 1.065 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-251-9198 MPN 6-38550-6Receptacle Roller
- 1560-00-524-6000 MPN 9-23891-3Universal Coil Assembly
- 1560-00-563-9151 MPN 9-60891-5Stabilizer Airshield
- 1560-00-612-9055 MPN 26-4592Hydraulic Tube Connectio Fitting
- 1560-00-620-7552 MPN 65-8808-4Boom Telescoping Tube Guard
- 1560-00-703-2839 MPN 29-5368-15Radome Latch Cap
- 1560-00-776-8450 MPN 29-11234-2Aircraft Structural Panel
- 1560-00-788-8085 MPN 5-84029-6Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-483-3855 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LM4U7 | The Boeing Company |