NSN 5306-01-484-2016
Coaxial Connector
Bolt has external wrenching; 220 ksi minimum tensile; 132 ksi minimum shear.
Manufacturer part number NAS1785-5-12 for national stock number 5306014842016.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-484-2016.
-
MPN or Model
NAS1785-5-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.593 inches -
Fastener Length
1.343 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.290 inches and 0.309 inches -
Width Between Flats
0.418 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.040 inches and 0.060 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
32.0 microinches sides of head -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Chromate -
Surface Treatment Specification
Ams 2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-135-7076 MPN NAS1746-1Conductor Splice
- 4920-01-532-5099 MPN NAS76A12-108Airc Sleeve Bushing
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5935-01-517-5412 MPN SAE AS50151Electrical Receptacle Connector
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5305-00-004-3171 MPN NAS1157-64Close Tolerance Screw
- 5305-00-008-5920 MPN NAS1190E04T5LSocket Head Cap Screw
- 5305-00-121-2342 MPN MS27039C1-30Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-484-2016 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| NAS1785-5-12 | National Aerospace Standards |
Stock Check
- NE: 59