NSN 5306-01-484-6834
Coaxial Connector
Between 1.575 inches and 1.622 inches fastener length, double hexagon head style, between 0.247 inches and 0.267 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number EWSB22-7-A18 for national stock number 5306014846834.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-484-6834.
-
MPN or Model
EWSB22-7-A18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.622 inches and 0.642 inches -
Fastener Length
Between 1.575 inches and 1.622 inches -
Head Style
Double hexagon -
Head Height
Between 0.247 inches and 0.267 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4358 inches and 0.4367 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.625 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ms6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-560-8322 MPN 195014-6-9-4 Two Lug Receptacle
- 1560-01-560-8324 MPN 195014-6-11-01 Two Lug Receptacle
- 5305-00-057-3700 MPN 51B222-13Machine Screw
- 5305-00-385-5345 MPN NAS1190E06T6LSocket Head Cap Screw
- 5305-00-754-2071 MPN NAS1203-9WClose Tolerance Screw
- 5305-01-025-6408 MPN 106752-02-106CMachine Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-484-6834 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-7-A18 | Sps Technologies, Llc |