NSN 5306-01-484-6870
Coaxial Connector
Between 2.122 inches and 2.142 inches fastener length, double hexagon head style, between 0.340 inches and 0.360 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number EWSB22-10-A24 for national stock number 5306014846870.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-484-6870.
-
MPN or Model
EWSB22-10-A24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.632 inches and 0.642 inches -
Fastener Length
Between 2.122 inches and 2.142 inches -
Head Style
Double hexagon -
Head Height
Between 0.340 inches and 0.360 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Single Shear Strength
132000 pounds per square inch -
Thread Diameter
0.625 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp h11 -
Material Specification
Ms6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-170-2952 MPN 106712-3-3TClose Tolerance Screw
- 5305-00-465-5483 MPN NAS1189E4P12NSocket Head Cap Screw
- 5305-00-820-7861 MPN NAS1207-13Close Tolerance Screw
- 5305-00-890-0092 MPN NAS1205-20Close Tolerance Screw
- 5305-01-025-7753 MPN NAS1191E08P5Socket Head Cap Screw
- 5305-01-054-6281 MPN 12155-3-A8PClose Tolerance Screw
- 5305-01-057-0350 MPN 66117H9-25Close Tolerance Screw
- 5305-01-084-8275 MPN SFH22D4A4Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-484-6870 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWSB22-10-A24 | Sps Technologies, Llc |