NSN 5306-01-485-3355
Coaxial Connector
Dished hexagon head style, between 0.188 inches and 0.203 inches head height, between 0.554 inches and 0.564 inches width between flats, grip diameter: between 0.436 inches and 0.437 inches .
Manufacturer part number NAS6706U21 for national stock number 5306014853355.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-485-3355.
-
MPN or Model
NAS6706U21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.554 inches and 0.564 inches -
Grip Diameter
Between 0.436 inches and 0.437 inches -
End Application
C0890, panavia aircraft -
Thread Diameter
0.375 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-045-8693 MPN NAS709T1Stud Terminal
- 5935-01-597-0335 MPN E0762F15-05LSpec Backshell
- 1560-01-623-8875 MPN 520-14948-3Aircraft Stringer
- 5305-00-025-4006 MPN NAS1189E08P12HNSocket Head Cap Screw
- 5305-00-052-7485 MPN MS35198-87Machine Screw
- 5305-00-058-2068 MPN MS24677-10Socket Head Cap Screw
- 5305-00-080-0064 MPN NAS1352-04-4PSocket Head Cap Screw
- 5305-00-136-7445 MPN NAS1081-08D2NSetscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-485-3355 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |
NAS6706U21 | National Aerospace Standards |