NSN 5306-01-486-5787
Coaxial Connector
Between 3.188 inches and 3.218 inches fastener length, double hexagon w/hole head style, between 0.190 inches and 0.210 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number BACB30LE345 for national stock number 5306014865787.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-486-5787.
-
MPN or Model
BACB30LE345
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.390 inches -
Fastener Length
Between 3.188 inches and 3.218 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.190 inches and 0.210 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
Between 0.359 inches and 0.369 inches -
Extended Washer Thickness
Between 0.040 inches and 0.060 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
End Application
B-1bacft -
Thread Diameter
0.190 inches -
Grip Length
Between 2.803 inches and 2.823 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-283-4635 MPN BACB30LU3-3Close Tolerance Screw
- 5306-00-205-3700 MPN BACB30MF6-18Close Tolerance Bolt
- 5306-01-046-0509 MPN VAL23608-4D29Shoulder Bolt
- 5306-01-141-7886 MPN VAL23608-6-34Shoulder Bolt
- 5306-01-160-7560 MPN BACB30NE4-21Close Tolerance Bolt
- 5306-01-188-6841 MPN VCG0001-4D12Close Tolerance Bolt
- 5306-01-204-4196 MPN LD111-0021-0720Shear Bolt
- 5306-01-219-9121 MPN 3M1043-5-19-76Close Tolerance Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-486-5787 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LE345 | The Boeing Company |
BACB30LE345 | Sps Technologies, Llc |
BACB30LE345 | Mil-bar Plastics, Inc. |
BACB30LE345 | Valley-todeco, Inc. |
BACB30LE345 | Federal Manufacturing Corporation |
BACB30LE345 | Sps Technologies, Llc |
BACB30LE345 | Sonic Industries Inc. |