NSN 5306-01-486-6585
Coaxial Connector
0.938 inches fastener length, double hexagon w/hole head style, 0.234 inches head height, width between flats: between 0.347 inches and 0.361 inches .
Manufacturer part number LD111-0021-0407 for national stock number 5306014866585.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-486-6585.
-
MPN or Model
LD111-0021-0407
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
0.938 inches -
Head Style
Double hexagon w/hole -
Head Height
0.234 inches -
Width Between Flats
Between 0.347 inches and 0.361 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
End Application
B1b aircraft -
Thread Diameter
0.2500 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-058-0795 MPN NAS1102-06-7Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-194-9177 MPN PBF1356C08-7Machine Screw
- 5305-01-435-0460 MPN BACB30LU14-53XClose Tolerance Screw
- 5305-01-580-9509 MPN BACB30NT3-3Close Tolerance Screw
- 5306-00-469-3634 MPN C4356CR5-505Shoulder Bolt
- 5306-00-802-0746 MPN 51B464-4A5Machine Bolt
- 5306-00-905-8448 MPN MS21250-04004Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-486-6585 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0021-0407 | Boeing Company, The |
LD111-0021-0407 | Sps Technologies, Llc |